Description of parts
A typical Steel Mixer rig is usually configured using the following items:-
|
Steel Mixer(Item 1)
 |
This includes; the Steel Mixer itself, a pair of 9VDC leads (used to power up effects pedals), PSU and mains lead. Note the Steel Mixer PSU is fitted with an IEC mains socket so the mains lead may be changed to suit the mains supply. Please state when ordering the type of mains plug required. e.g. UK or US. 9VDC Leads Steel Mixer PSU
|
|
Floor Plate (Item 3)
 |
The Floor Plate allows the Steel Mixer, volume pedal and two effects pedals to be fixed to a common plate. Pre-drilled holes allow common pedals to be easily positioned and fixed to the plate. Being manufactured from aluminium the plate is light weight. A black anodized coating protects the aluminium. |
|
24VDC Lead (Item 5/6)
 |
Lead required to power up a Telonics* volume pedal or new type 24VDC Hilton* volume pedal. |
|
Case
(Item 9/10)
|
A light weight soft case or hard shell flight case sized to fit the Steel Mixer, Floor Plate, volume pedal and effects pedals assembled as a complete unit can be supplied.
|
|
Jack Leads (Item 8)
|
A set of George L's jack plugs and cable made up to suit the Floor Plate arrangement.
|
|
Volume Pedal (Item 7)
|
The Steel Mixer will work with any volume pedal that works with a steel guitar as a stand alone item. Note: The Floor Plate is pre-drilled to allow easy fitting of a Goodrich*, Hilton* or Telonics* pedal. If you require a Telonics* pedal we can supply (at extra cost) this item.
|
|
Delay & Reverb Pedal
|
Purchased separately. The Steel Mixer will work with any type of delay or reverb effects unit that can be set up to output just the effected signal. Note: The Floor Plate is pre-drilled to allow easy fitting of Boss* and Digitech* (X-Series) pedals.
|
*Note: Boss, Digitech, Goodrich, Hilton and Telonics are fine companies that produce excellent products. No association is implied by the use of their names.